UT-150 Ultrasonic Flaw Detector
Scan QR

Ut 150 ultrasonic flaw detector(1)
Ut 150 ultrasonic flaw detector(2)
Ut 150 ultrasonic flaw detector(3)
Ut 150 ultrasonic flaw detector(4)
Ut 150 ultrasonic flaw detector(5)
Ut 150 ultrasonic flaw detector(6)
Ut 150 ultrasonic flaw detector(7)
Ut 150 ultrasonic flaw detector(8)
缩略图 1
缩略图 2
缩略图 3
缩略图 4
缩略图 5
缩略图 6
缩略图 7
缩略图 8

产品特点与应用

Product Features:

  • Ergonomic housing, water- and oil-resistant, IP65-rated; high-transparency, wear-resistant and scratch-resistant glass panel; rubber anti-slip protective boot; one-handed grip; net weight only 1.13 kg; dimensions 230 × 157 × 52 mm.
  • Dual-damping swivel stand for multi-angle inspection indoors and outdoors; equipped with hand strap and anti-slip pad; portable and durable.
  • 5.7-inch IPS full-color LCD, 640 × 480 resolution, 60 Hz refresh rate, wide viewing angle and visible under strong light; brightness continuously adjustable from 20% to 100%; 4 selectable UI color schemes.
  • Waveform visualization: supports waveform fill, peak marking, echo coding (distinguishing 1st–9th reflection echoes), independent gate color change, and gate widening/zooming for detail display; provides two display modes: echo envelope and peak memory.
  • Built-in high-capacity lithium battery, continuous operation ≥12 h; DC 9 V power supply; supports direct plug-in adapter for use while charging.
  • Dual USB ports: USB storage (USB flash drive) and USB data communication, USB 2.0 high-speed transmission; supports BNC/LEMO dual-type probe sockets (separate T transmit / R receive).
  • Built-in local storage: 500 inspection channels and 1,000 inspection reports; data retained after power failure.
  • Video recording storage: internal memory stores up to 10 recordings, maximum 5 minutes each (30 fps); USB flash drive recording has no duration or quantity limit.

Product Applications:

  • Used for butt weld inspection in factory buildings and bridges; DAC curves are used to identify lack of penetration and cracks, and the weld diagram enables precise defect location.
  • Compatible with JB/T 4730 standard; detects fatigue cracks in tank shell plates and nozzles; supports curved-surface correction for inspection of cylindrical shell workpieces.
  • Rail transit inspection: detects rail parent metal and internal porosity and inclusions in rail welds; the portable body is suitable for outdoor field work, and long battery life supports all-day inspection tours.
  • Detects white spots and laminations in castings, forgings and shafts; the AVG curve can automatically convert defect indications into equivalent aperture size.
  • For oil and gas transmission pipelines: wall-thickness corrosion and girth weld defect screening; supports video recording and PDF reports for retaining inspection records for filing.

技术规格

Detection range 0-15 m (longitudinal wave in steel); 30 m in through-transmission mode
Velocity range 100-20,000 m/s
Operating stability Signal amplitude variation ≤ ±2%; time-base drift ≤ ±0.5%
Probe frequency and amplifier bandwidth

Narrowband Wideband
1.0M(0.41-2.1)

2.5M(1.4-3.6)

5.0M(3.7-6.3)

10M(8.2-11.8)

15M(13-17)

1.0M(0.43-2.3)

2.5M(1.0-4.0)

5.0M(3.0-7.0)

10M(7.5-12.5)

15M(12.5-17.5)

Dead zone after transmitting pulse ≤9μs
Usable dynamic range ≥100dB
Attenuator error ≤±1.0dB(20dB span) ≤±2.0dB(60dB span)
Vertical amplitude linearity error ≤2%
Horizontal time-base linearity error ≤0.5%
Repetition pulse frequency and accuracy ≤±5%(20~2000Hz)
Equivalent input noise ≤30nV√Hz
Number of inspection channels 500
Number of defect reports 1000
Inspection report types PDF inspection report
Display and resolution 5.7-inch IPS high-brightness wide-viewing-angle display; 60 Hz refresh rate; 640 × 480 resolution
Digital rejection 0-80%, without affecting linearity or gain
Probe types Straight beam probe, angle beam probe, dual-element probe, through-transmission probe
Gates Initial (echo) gate, lost-echo gate; single-gate reading, dual-gate reading
Trigger mode Peak trigger, edge trigger
Alarm Echo alarm, lost-echo alarm, buzzer alarm, LED alarm
Power supply DC 9 V; lithium battery for over 12 hours of continuous operation
Auxiliary functions Screen capture, video recording and playback, B-scan, automatic DAC/AVG curve generation, AWS intelligent acceptance rating, data analysis software
Advanced functions Weld diagram; probe frequency measurement (optional)
Number of video files 10 video files stored internally, each up to 5 minutes; real-time waveform at 30 frames per second; no limit on the number and duration of recordings on an external USB flash drive
Dimensions and weight 230 × 157 × 52 mm (W × H × D); weight: 1.13 kg
Operating environment Temperature: -25 to 55 °C; relative humidity: 20-95% RH
Protection rating IP65
Inspection standards EN 12668-1; complies with JB/T 10061 and other industry standards
Pulse type Negative pulse; transmitter pulse voltage: selectable in steps from 100 V to 500 V
Pulse width Continuously adjustable from 30 ns to 510 ns to match probes of different frequencies
Pulse shift -20 μs to 10,000 μs
Probe damping 50 Ω, 150 Ω, 300 Ω, 400 Ω selectable, meeting different requirements for sensitivity and resolution
Probe zero offset 0 μs to 99.99 μs
Sampling 12-bit A/D sampling, high-fidelity waveform
Rectification mode Positive half-wave; negative half-wave; full wave; RF wave
Max gain 110 dB (step selectable: 0.1 dB, 1 dB, 2 dB, 6 dB)
Communication interface USB / RS232
Probe connector BNC / LEMO

标准配置

Name Qty Photo
Flaw detector main unit 1pc
Straight beam probe 1pc
Angle beam probe 1pc
Power adapter 1pc
LEMO/BNC probe cable 2pcs
USB flash drive 1pc
Couplant 1pc
User manual 1pc
Certificate of conformity 1pc
Warranty card 1pc
Test report 1pc
Instrument carrying case 1pc
×
WeChat QR

Wechat: 13918745376